Lesson Plan: An
Investigation into Effects of Rhizobium Soil Bacteria on Nitrogen
Availability Subject: Earth and
Space / Soils Classtime: 9-10
weeks Grade Level: 7-12
Materials/Technology:
- 20 seeds of a leguminous plant, such as garden pea, green bean, or
clover (Red clover seeds are supplied with the Nitrogen-Fixation Study
from Carolina supply.) These seeds should not be pre-inoculated.
(A colored coating usually indicates inoculation.)
- an inoculum of Rhizobium bacteria that is host-specific to
the chosen host plant. If the Nitrogen-Fixation Study Kit from Carolina
Biological (see reference) is not used, then appropriate host seed and
bacterial inoculum can be obtained from a seed retailer.
- 4 identical or closely similar pots (or other suitable containers
with drainage holes) that are large enough to hold 1 pint of soil
- 4 pints of fine mason’s sand (sandbox sand)
- 1 teaspoon of a 0-20-20 fertilizer or �2 teaspoon of 0-10-10
or 0-10-5. Different ratios such as 0-12-6 can be used as long as they
contain no (or almost no) nitrogen.
- balance
- tubs to wash soil from plants
Safety, Handling, Disposal: Care should
be used in handling the fertilizers and the bacterial inoculum.
Learner Outcomes: Students should be
able to:
- Collect, record and interpret their data.
- Identify the control and the variables in the experiment.
- Describe the growth of plants with and without nitrogen fixing
bacteria.
- Name the bacterium responsible for making nitrogen available to the
plant.
Problem/Purpose: What is the effect of a
nitrifying bacteria such as Rhizobium on plant growth?
Background/Inquiry: This experiment will
make use of a soil bacterium of the genus Rhizobium and a host legume to
demonstrate the effects that soil microbes can have on soil fertility and
nutrient availability.
Vocabulary List: Here.
Hypothesis: Make a hypothesis after
reading through and understanding the procedure. Example: 'Bacteria will
have no effect on the growth of the legume.'
Procedure:
-
Label each container with a different label:
- no additions (sand and plants)
- inoculated -- no fertilizer (sand, bacteria and plants)
- not inoculated -- fertilized (sand, fertilizer and plants)
- inoculated -- fertilized (sand, fertilizer, bacteria and plants)
-
Put half of the sand (1 qt ) into a mixing bowl or
container and add 1 teaspoon of the 0-20-20 fertilizer to the sand and
mix thoroughly. If using a 0-10-10 grade fertilizer, or a 0-10-5
fertilizer, use 2 tsps. For other grades, adjust the amount
proportionately.
-
Place 1 pint of the fertilized soil in each of pots #3
& #4. Place 1 pint of the unfertilized soil in each of pots #1 &
#2.
-
Plant 5 seeds in each of the pots.
-
Add Rhizobium inoculum to the surface layer of
the sand in pots #2 and #4.
Note: Avoid Rhizobium
contamination in the not inoculated pots.
- Moisten the soils of each pot until water just starts to run out of
the holes in the bottom. Use tap water or distilled water. If your water
is chlorinated, it may be best to let it stand in a container for a day
to give the chlorine a chance to dissipate before use.
- Place each of the pots in separate shallow dishes or trays. Put them
together (to eliminate environmental variables) in a warm,
well-illuminated location, and water as needed to maintain
moisture.
- If one or more of the pots has less than 5 plants after the seeds
have germinated and developed into shoots several inches tall, remove
the smallest plants so that each pot contains the same number of plants.
- Have the students predict the results (based on the introductory
remarks for this lab) and record those predictions.
- Make and record measurements/observations at least 2x per week. It
will take about six weeks for the plants to develop root nodules, so the
experiment should run for at least 9-10 weeks to be able to observe any
differences between the treatments with and without Rhizobium.
- Measure and record the height of the aerial parts of the plants in
each pot (cm). Determine the mean height (cm) for the plants in each
pot. Record in the data table.
- Observe the appearance of the plants, including color, leaf size,
leaf spacing, and any other observations and record them.
- At the end of the nine-week growth period harvest the plants.
Harvest by immersing the container in a tub of water and carefully
washing the soil off the roots. Be careful while harvesting to avoid
loss of plant material.
- Record the wet mass of the plants for each separate pot.
- Sketch and/or describe the comparative differences between root
growth, nodule formation and overall vigor of the plants in each
pot.
- Air dry the plants for several days in a sunny location until a
constant dry weight is obtained. Record the dry weight of the entire
group of plants for each separate pot.
- Interpret the measured / observed results and reconcile them with
your predictions as a written conclusion.
Data Table
Treatment |
Pot 1
No Treatment No Fertilizer |
Pot 2
Inoculated No Fertilizer |
Pot 3
Not Inoculated Fertilizer |
Pot 4
Inoculated Fertilizer |
Date |
Find individual plant height, then the average for
each pot.
Record the appearance, including color, leaf size,
leaf spacing, and other significant observations. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Results/Analysis: Using the data
collected in the data table, create a line graph with time on the
horizontal axis and plant height in cm on the vertical axis. Include all
four pots on one graph for comparison. Plot the average for each pot
only.
Using the data collected from the harvesting of the plants,
create a bar graph with mass on the vertical axis and each pot’s label on
the horizontal axis. Include the wet mass and the dry mass as two separate
bars for each pot.
Write a paragraph that summarizes the
differences in the four groups of plants using the data in the chart and
graphs.
Conclusions: Was your hypothesis
supported? Why or why not?
What questions came up during the lab
that might be answered with further investigations?
What effect do
you think it would have on a crop of peas to use the Rhizobium
inoculum? How could the hypothesis that "Rhizobium bacteria adds
nitrogen to the soil" be tested by further experiments with the current
set-up?
Assessments:
- What was the purpose of using washed sand as the "soil"?
- What is nitrogen fixation?
- Which plants in this experiment showed the greatest above-ground
growth?
- Which plants in this experiment showed the greatest nodule formation
on the roots?
- What is the relationship between a nitrifying bacteria and a legume
such as a pea plant?
Integration: Mathematics (ratios, percent
error).
Reflections: Share your thoughts on this
lesson with the NTEN team.
Please send an e-mail to Patti
Harrison.
Extensions:
-
Use a non-legume vs a legume to study beneficial
symbiotic relationships.
-
Examine the nodules of the roots and place on culture
plates to study the bacteria present.
-
Examine the soil and plate for the presence of
nitrifying bacteria.
References/Resources:

Credits Contributing Teacher: Randy Farchmin NTEN Course: LRES 580: The Dirty Dozen: Twelve
Principals of Soil Science Instructor:
Jim Bauder Developing Team: T.L. Buck
Buchanan, Don Samuels, Patti Harrison, John Usher, Don Wilson HTML Programmers: Luke Clemens, Ken Eklund,
Ching-Kwong Chia
Copyright © 1998 - 2002, National Teachers
Enhancement Network Comments: pattih@montana.edu


Up to Top
|